This project is designed to be an introduction to using the lathe for drilling operations. the Whistle is set to be a Grade 9 project and can allow students to be as creative as the like.

Samples:

 

Above is the sample whistle which is functional. Students are encouraged to put a design on the outside of the whistle but it is not mandatory.

Tools Required:

File

Digital /Vernier Caliper

Lathe

Lathe Drill Chuck

Hack Saw

5/16″ drill bit

3/8″ drill bit

 

Optional Tools:

Center Punch

Hammer

Buffing Wheel + polish

Sand Paper