Materials at the Laser

Materials at the Laser

The following materials can be purchased at the laser directly:

Chipboard*

  • 0.030″ (0.75mm), 30″ x 40″ — $4.00
  • 0.060″ (1.5mm), 30″ x 40″ — $4.00

*Please note, if you would like to cut chipboard purchased at the laser, you will need to bring your own knife to cut the material down to the size of the bed (Lasserre, 23”x39”; McMillan, 16”x28”).

 

Russian birch plywood

Lasserre

  • 3mm (1/8″), 23″ x 30″ — $4.00
  • 6mm (1/4″), 23″ x 30″ — $8.00

MacMillan

  • 3mm (1/8″), 2 @ 15″ x 28″ — $4.00
  • 6mm (1/4″), 2 @ 15″ x 28″ — $8.00

Plastics

Lasserre

  • 0.027″ (0.7mm) PETG, 24″ x 32″ — $8.00
  • 0.06″ (1.5mm) acrylic, clear, 23″ x 32″ — $16.00
  • 0.06″ (1.5mm) acrylic, white, 23″ x 32″ — $28.00
  • 1/8″ (3 mm) cast acrylic, clear, 23″ x 32″ — $28.00
  • 1/8″ (3 mm) cast acrylic, white or black, 23″ x 32″ — $30.00
  • 1/4″ (6 mm) cast acrylic, clear, 24″ x 32″ — $63.00
  • 1/4″ (6 mm) cast acrylic, white or black, 24″ x 32 — $60.00

MacMillan

  • 0.06″ (1.5mm) acrylic, clear, 2 @ 16″ x 24″ — $16.00
  • 0.06″ (1.5mm) acrylic, white, 2 @ 16″ x 24″ — $28.00
  • 1/8″ (3 mm) cast acrylic, clear, 2 @ 16″ x 24″ — $28.00
  • 1/8″ (3 mm) cast acrylic, white or black, 2 @ 16″ x 24″ — $30.00