Category Archives: Outreach Project

Replacing UV Lights with a “Green” Alternative

With summer just around the corner, it’s nearing that time of year where we start slapping on sunscreen to protect ourselves. After all, it’s well known that ultraviolet (UV) rays from the sun can damage our DNA. Despite this, UV light is still used for all sorts of applications – ranging from UV lamps at nail salons, to the hardening of resins.

A UV lamp in action. Source: cottonbro, Pexel.

The question remains: is it necessary to use UV light in these processes?

Good news: no!

Alternatives to UV light for similar processes have been recently identified by researchers. One such researcher is Taylor Wright, a graduate student at the University of British Columbia. In 2020, Wright developed a safe, low-cost method which uses harmless green LED lights instead of UV light. Wanting to learn more about this research, we sat down for an interview with Wright.

Into the details of cross-linking

The previously mentioned applications (UV lamps, resin hardening) are examples of a process called cross-linking. For an explanation of cross-linking, as well as a walkthrough of Wright’s cross-linking method of a material called polydimethylsiloxane (PDMS), please refer to the following video:

Okay… why should I care about this?

As we’ve previously said, frequent use of UV light in cross-linking processes poses a health risk to workers. By substituting with green LEDs, Wright’s newly developed method could help eliminate potential health complications in workers who deal with cross-linking processes.

But wait, there’s more! This research can also be applied to the biomedical field, through making antimicrobial fabrics. Turns out, by slightly altering the chemical properties of PDMS, we can give PDMS antimicrobial properties. By dipping a piece of fabric into liquid PDMS, then cross-linking to produce a solid PDMS coating, we can produce antimicrobial fabrics! The diagram below helps visualize the process.

Step-by-step walkthrough of making the antimicrobial fabric. Source: Wright’s 3MT

This would have important implications for reducing the rate of infections in high-risk settings, such as hospitals. In the US alone, there are approximately 100,000 deaths resulting from infections acquired in a healthcare setting. Considering the COVID-19 pandemic that we’ve been in for a whole year now, this application has never been more relevant. Wright’s low-cost, simple, and safe method of producing antimicrobial fabrics could be crucial in reducing the impacts of any future pandemics.

Beyond the research

Although we learned much about his research during our interview with Wright, we were also able to get a glimpse into the person behind the science. To hear about his journey that resulted in the person he is today, listen to this week’s episode of Vancity Science, a podcast run by one of our members, Chie!

Audio sources: Blue Dot Sessions, Free To Use Sound – Royalty Free Sound Effects, Kyster, SnakeBarney, dobroide, KelliesKitchen, ZyryTSounds, ShadyDave, InspectorJ

 

Special thanks to Taylor Wright – we are excited to see further innovations by scientists with unique perspectives that can make the world a safer and better place!

– Sam Jung, Chie Nakayama, Madeline Filewych

Global Warming: A Death Wish for Fish

After a study done in 2020 using computer simulations, Dr. William Cheung and his team from the University of British Columbia found a concerning fate for our fish: as a result of increased ocean temperatures, the fish populations in the northeast Pacific Ocean are predicted to decline significantly by 2050.

The Great Barrier Reef, Australia.
Credit: CruiseExperts, cruiseexperts.com

We take for granted how large and beautiful our oceans really are. They are full of life, and house over 2 million different species of animals ranging from the beautiful coral reefs in Australia, to the largest animals ever discovered. However, imagine if the oceans were empty, and life no one longer existed underwater. Sadly, this is becoming a reality, and according to marine expert Dr. William Cheung, we are headed straight in this direction.

Continued global warming resulting from our emissions has caused the temperature of surface ocean waters to steadily increase. These rises in temperature have led to a doubling of marine heatwaves, or periods of extremely high temperatures in ocean waters, since around 1982 (as seen in the graph below), in turn significantly affecting all marine life, especially fish.

Large Recent Increases in Marine Heatwaves
Credit: Climate Central, climatecentral.org

Dr. Cheung not only identified patterns of current decline in fish populations as a result of marine heatwaves, but has predicted significant future decline as global warming continues. In fact, Dr. Cheung predicts that populations of common fish species such as sockeye salmon will decrease by more than 40% by 2100. These predictions are based on the assumption that we do not change our current emission trends, which does not have to be the case.

You might not think this, but you, me, and every single person on this planet plays a part in our global warming problem. Everyday decisions such as driving your car can contribute to global warming and have downstream effects in marine environments, as described in the video below.

Although there are new policies tackling climate change, and large progressions made in the right direction, according to Dr. Cheung, this is still not enough. He says,

“We really need to pick up the pace and accelerate the actions against climate change.” 

So what can I do to help?

Fixing a global problem like climate change requires global contributions, and it starts with all of us. Although it might be true that your changes alone wouldn’t stop climate change, if all 7.6 billion people on the planet made one small positive change, the effects would be enormous. The TeamTrees podcast below highlights the many different ways we can start protecting the future of our oceans now.

Thank you to freesound.org (Robinhood76, SomeoneCool15, Simon_Lacelle, Votichez, Sentuniman) for providing the sound effects used in our podcast.

If we are to save the fish and the rest of marine life from these increasingly prevalent marine heatwaves, we need to act now.

~SO Group #3: William, Jessica, Balkaran, Adam

Chemistry for Cancer: New Radioactive Tracers for Cancer Diagnosis

Cutting-edge chemistry may be the key to fast and efficient cancer diagnoses. In early 2020, Antonio Wong and his research team at the University of British Columbia (UBC) in Vancouver, BC, developed a new way to synthesize radioactive tracers for positron emission tomography (PET) scan cancer diagnosis. Recently, I interviewed Antonio to discuss his research.

The Problem 

Imaging technologies like the CT scan, ultrasound, X-ray, MRI, and PET scans allow doctors to identify cancerous masses in patients. Although PET scans are a common way to diagnose cancer, researchers want to find ways to make tracers more efficiently. So, Antonio and his team aimed to develop a new kind of tracer and to make the synthetic process more efficient.

PET scan and technician, Source: http://www.bccancer.bc.ca

The Science 

Since cancer cells divide quickly and uncontrollably, they require many more cellular “building blocks” compared to regular cells. Taking advantage of this, researchers have previously developed “tagged” versions of  these building blocks, called tracers, which accumulate inside cancer cells. This allows doctors to see tumors in PET scan images. When I spoke to Antonio, he explained that the “golden standard” for PET imaging uses a sugar molecule called glucose tagged with a radioactive fluoride atom (called FDG) which is responsible for the glow on medical images. To see how tracers work, check out this video below.

Combining innovation and creativity, Antonio’s team developed a more efficient way to make these tiny building blocks by using a careful mixture of chemicals. They used a molecule called thymidine which is required for cell division, tagged it with a radioactive atom (18F), and injected into mice with cancer. The mice were then put into a PET scan to see if the building blocks were “building up” inside the tumors, which would glow on the PET scan images.

Tracer synthesis, Source: Antonio’s Paper

The Impact 

When Antonio ran this study, he was an undergraduate student at UBC. As a result, his story has caught the attention of students on campus. After my interview with Antonio, my colleague Parwaz, a UBC student who runs a podcast called “Thinkin’ a Latte”, chatted with two other UBC undergraduates about the interview. Check out their podcast below.

Although the study’s findings are promising, using thymidine-based tracers for PET tumor imaging requires much more research before it can be used in clinics. 

“I think the significance of this paper is not like ‘look this is the next blockbuster drug that we’re trying to use’, this is more like a proof of concept”

– Antonio Wong

Nonetheless, cancer is a prevalent disease that has touched the lives of almost everyone and research like Antonio’s is bringing much needed innovation and creativity to the field.

– Maya Bird 

Co-authors: Parwaz, Samin, and Teaya